ABOUT
THIS
MANUAL
This Service Manual was written expressly for the
TOR0
TClOOO Gas
Powered Trimmer. The Tor0 Company had made every effort to make the
information in this manual complete and correct.
This manual was written with the service technician in mind. It
is
organized
so
that information used most often is up front. As a result, you will find
reference information on safety, maintenance, specifications, special tools
and troubleshooting all in the front third of the manual.
Disassembly, inspection and reassembly procedures are covered in the last
two-thirds of the manual and are grouped by component.
We
tried to cover
each common repair with its own section or sub-section. For example, you
will find that air gap adjustment and ignition coil replacement are called out
separately.
And, because certain components are often difficult to troubleshoot without
a good understanding of how they work, we have included some
component theory. This information can be found at the beginning of most
service procedure sections.
We
are hopeful that you will find this manual a valuable addition to your
shop. If you should come across any errors or
if
you have any questions
regarding this manual, please contact us at the following address:
The Tor0 Company
8111 Lyndale Avenue South
Minneapolis, MN, USA
55420
The Tor0 Company reserves the right to change product specifications or
this manual without notice.
The Tor0 Company gratefully acknowledges the assistance of Mitsubishi
Heavy Industries, Ltd. in the production of this manual.
COPYRIGHT RIGHTS
RESERVED
Tor0 Company
1987
MINNEAPOLIS,
MN
55420
U.S.A.
To Next Page
Loading...
Need help?
General