Toro TC 1000 - Tool Requirements

TOOL REQUIREMENTS
Flywheel Puller Toro P/N 41-7650 Dial Indicator
Spark Tester Toro P/N 41-7890 Magnetic
V Blocks &. Dial Indicator Stand
Tachometer Toro P/N 42-2730 Spark Plug Gapping
Tool
Feeler Gauge Torque Wrench (14/16)
Compression Gauge Threebond #1104 Toro P/N
505-80
Metric Socket Set 3/8" Drive Loctite #242 Toro P/N 505-76
Spark Plug Socket Micrometer
#2 Phillips Screwdriver Snap Ring Plier (inside
& outside type)
12
oz. Ball Peen Hammer Hex. Key Set
Needle Nose Pliers
7