SECTION
The TClOOO can be adapted to cut heavy grass
and weeds by installing the Flex Blade in place of
the Tap and Trim cutter head. The blade is
25.4
cm (10 inches) in diameter and is reversible for
long life.
CAUTION:
Never attempt
any service of the trimmer
head without first shutting
off the engine and allowing
the implement to come to a complete
stop.
Flex Blade Removal from Drive Shaft
1. Grasp the Flex Blade to prevent it from
rotating then remove the nut by turning it
counterclockwise. See Fig. 115.
Figure 115
FLEX
BLADE
2.
Remove the washer, flex blade and the blade
adapter.
Flex Blade Installation
on
Drive Tube
1. Mount the blade adapter, the Flex Blade and
the washer on the drive shaft. See Fig. 116.
Figure 116
2.
Secure with the adapter nut by turning it
clockwise.
To Next Page
Loading...
