8
Assembling the Bagger T op
Parts needed for this procedure:
1 Bagger top
1 Bagger screen
2 Hairpin cotter
Procedure
1. T urn the bagger top over .
2. Install the screen as shown in Figure 18 and
ensure that it slopes down toward the collection
bags.
Note: Make sure that the screens snap into
place and the tabs engage the bagger top.
g201881
Figure 18
1. Bagger top
4. Slot in bagger top
2. Screen
5. Hairpin cotter
3. Screen tab
14
To Next Page
Loading...
