Toro TITAN 79348 - Setup

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description
Qty .
Use
1
No parts required
–
Prepare the machine.
Left weight mount
1
Right weight mount 1
Bagger weight 3
Bolt (3/8 x 1 inch)
6
Bolt (3/8 x 2-3/4 inches)
2
W asher 2
2
Flange nut (3/8 inch)
8
Install the weights.
3
No parts required
–
Remove the grass deector and belt
cover .
Blower support 1
Hex washer-head screw (3/8 x 3/4 inch)
2
Baf e
1
Carriage bolt (5/16 x 3/4 inch)
4
4
Flange nut (5/16 inch)
4
Install the baf e and blower support.
Pulley assembly 1
5
Belt cover 1
Install the pulley assembly and belt
cover .
Stabilizer bracket
1
Bagger frame
1
Bolt (5/16 x 1 inch)
6
Locknut (5/16 inch)
6
Pivot frame
1
Long clevis pin 1
Hairpin 3
Clevis pin
2
Rod 2
6
W asher 2
Install the attachment mount.
Latch rod 1
7
Hairpin cotter 1
Install the latch rod.
Bagger top 1
Bagger screen 1
8
Hairpin cotter 2
Assemble the bagger top.
Bag frame
2
9
Grass bag
2
Assemble the grass bags.
10
Grass bag assembly
2 Install the bagger top.
1 1
Blower assembly 1 Install the blower assembly .
Powered bagger cover 1
12
Blower belt 1
Install the blower belt and powered
bagger cover .
13
Upper tube 1
Prepare the upper discharge tube
(Models with 48 inch and 54 inch decks
only).
6