Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger . Replace any decal that is damaged or missing.
decal136-4164
136-4164
1. W arning—read the Operator ’ s Manual . 4. Cutting/dismemberment hazard, impeller—keep away from
moving parts; keep all guards and covers in place.
2. W arning—hearing protection must be worn.
5. Cutting/dismemberment hazard, impeller—disengage the
PT O, remove the key , and wait for all moving parts to stop.
3. Thrown object hazard—do not operate the blower without the
entire system installed and latched.
6. W arning; loss of traction—do not operate with only
counterbalance weights installed; do not operate with only
E-Z V ac installed; operate only with both E-Z V ac and
counterbalance weights installed.
decal109-6809
109-6809
1. Crushing hazard of hand—do not remove the whole bagger from the machine; open the bagger top and then remove the bag(s)
from the bagger . Do not remove the bagger top when it is closed; open the bagger top and then remove it.
decal133-8061
133-8061
5
To Next Page
Loading...
