Toro TITAN 79348 - Installing the Blower Belt and Powered Bagger Cover

g201514
Figure 23
1. Blower assembly 3. Blower support
2. Blower pivot pin
g201893
Figure 24
1. Blower latch
12
Installing the Blower Belt
and Powered Bagger Cover
Parts needed for this procedure:
1 Powered bagger cover
1 Blower belt
Procedure
1. Install the belt around the blower pulley ( Figure
25 and Figure 26 ); refer to 1 1 Installing the
Blower Assembly ( page 16 ) .
Use the following belt based on the mower
deck size:
48-inch Mower
Deck
54-inch Mower
Deck
60-inch Mower
Deck
T oro Part No.
127-0074
T oro Part No.
127-0075
T oro Part No.
127-0076
g201516
Figure 25
Blower Belt Routing
1. Idler/tension pulley
3. Blower belt
2. Blower pulley 4. Drive pulley
17