g201513
Figure 26
1. Blower pulley 5. Idler arm
2. Blower in position (housing
portion removed for
illustrative purposes)
6. Drive pulley
3. Spring 7. Idler/tension pulley
4. Idler-pulley post 8. Blower belt
2. Ensure that the belt remains aligned to the
blower pulley while you are installing the blower
assembly .
3. Pull the spring loaded idler pulley away from the
xed spring post, and route the belt around the
mower deck pulley ( Figure 26 ).
Note: Ensure that the belt is routed around the
blower pulley correctly .
4. Route the belt around the drive pulley as
illustrated in Figure 25 and Figure 26 .
5. Install the powered bagger cover over the belt
cover , and secure it by tightening the knob
( Figure 27 ).
g201515
Figure 27
1. Knob 3. Belt cover
2. Powered bagger cover
18
To Next Page
Loading...
