MOWER DECK
5-6 2007 - 2008 Titan Z Service Manual
5
5. Place a spacer onto the spindle shaft (Fig. 247).
6. Position the mower blade onto the spindle shaft and
spacer (Fig. 248).
7. With two washers on the blade bolt, install the blade
bolt and two washers into the spindle shaft (Fig.
249).
Fig. 247 IMG-0650a
Fig. 248 IMG-0647a
Fig. 249 IMG-0648
8. Torque the blade bolt to 37 ± 5 ft-lbs. (50 + 6.8 Nm)
to secure the blade.
9. Position the spindle assembly to the inside of the
mower deck (Fig. 250).
Fig. 250 IMG-0617
To Next Page
Loading...
