MOWER DECK
5-72007 - 2008 Titan Z Service Manual
5
13. Route the mower deck belt around the spindle pulley
(Fig. 254).
10. Install 6 screws to secure the spindle assembly to
the mower deck. Torque the 6 screws to 200 – 250
in-lbs. (16.7 – 20.8 Nm) (Fig. 251).
12. Install the spindle pulley nut. Torque the spindle
pulley nut to 50 ft-lbs (67.8 Nm) (Fig. 253).
Fig. 251 IMG-0651a
Fig. 253 IMG-0653
Fig. 254 IMG-0654
11. Install the spindle pulley onto the spindle shaft. The
side of the pulley with the large hub should face
toward the spindle housing (Fig. 252).
Fig. 252 IMG-0652a
To Next Page
Loading...
