Toro TX 427 Series - Closing the Rear-Access Cover; Removing the Side Screens; Installing the Side Screens; Removing the Front Screen

ClosingtheRear-Access
Cover
1.Movetherear-accesscoverinplaceoverthebackof
thetractionunitmakingsurethatthetabslineupin
theslots.
2.Pushtheaccesscoverforward,liningupthehand-knob
screwswiththethreadedholesinthemachine.
3.Screwthehandknobstighttosecuretherear-access
coverinplace.
RemovingtheSideScreens
1.Openthehood.
2.Slidethesidescreens(Figure30)upandoutofthe
slotsinthefrontscreenandframe.
Figure30
1.Sidescreen
InstallingtheSideScreens
Slidethesidescreensintoplaceintheslotsinthefrontscreen
andframe.
RemovingtheFrontScreen
CAUTION
Iftheenginehasbeenrunning,theheatshieldwill
beveryhotandcouldburnyou.
Allowthetractionunittocoolcompletelybefore
touchingtheheatshield.
1.Openthehoodandremovebothsidescreens.
2.Loosentheboltssecuringtheweights(Figure31).
g013122
5
Figure31
1.Frontweight
4.Carriagebolts
2.Bolts5.Rearweight
3.Slopedplate
3.Removethecarriageboltsandnutssecuringthesloped
plate(Figure31).
4.Lifttheslopedplateupandoffthetractionunit.
5.Removethe4boltssecuringthefrontscreentothe
traction-unitframe(Figure32).
Figure32
1.Frontscreen
2.Bolts(leftsideboltnot
shown)
6.Removetheshoulderboltsandnutssecuringtheoil
coolertothetopofthefrontscreen(Figure33).
27