Toro VISION II Series User Manual

7
(Set Station Run Time Continued)
■ To Change Run Time Mode From
Minutes To Hours, Or Hours To
Minutes:
❑ Turn Station Dial slowly until
display shows Run Time.
Immediately press Set Time Key to
change mode. (Example shown:
Changing Minutes to Hours Mode.)
Note: Hours Mode displays Run
Time in three digits. (Example
shown: 2 hours and 20 minutes.)
❑ Turn Station Dial to display exact
Run Time. (Example shown: 3 hours
and 30 minutes.)
Note: To change back to Minutes
Mode, repeat procedure.
❑ Apply Hours Decal (supplied) to
stations set in Hours Mode.
Note: As each station operates during a watering cycle, its indicator will be
On and its set run time will count down on display.
12
5
15
30
60
90
MANUAL
OFF
CURRENT
TIME
12
5
15
30
60
90
MANUAL
OFF
1
3
6
9
5
15
30
60
90
1
3
6
9

Toro VISION II Series Specifications

General

Brand	Toro
Model	VISION II Series
Category	Controller
Language	English