Toro Workman GTX Series - Connecting the Battery; Charging the Battery

ConnectingtheBattery
ConnectthebatteryasshowninFigure47.
g034315
Figure47
ChargingtheBattery
WARNING
Chargingthebatteryproducesgassesthat
canexplode.
Neversmokenearthebatteryandkeepsparks
andamesawayfrombattery.
Important:Alwayskeepthebatteryfullycharged
(1.260specicgravity).Thisisespecially
importanttopreventbatterydamagewhenthe
temperatureisbelow0°C(32°F).
1.Removethebatteryfromthemachine;referto
RemovingtheBattery(page41).
2.Connecta3to4Abatterychargertothebattery
posts.Chargethebatteryatarateof3to4A
for4to8hours(12V).
Note:Donotoverchargethebattery.
3.Installthebatteryinthechassis;referto
InstallingtheBattery(page41).
StoringtheBattery
Ifyoustorethemachineformorethan30days,
removethebatteryandchargeitfully.Eitherstore
itontheshelforonthemachine.Leavethecables
disconnectedifitisstoredonthemachine.Store
thebatteryinacoolatmospheretoavoidquick
deteriorationofthechargeinthebattery.Toprevent
thebatteryfromfreezing,makesureitisfullycharged.
ReplacingtheFuses
Thereare5fusesintheelectricalsystem;theother
slotsareopenforoptions.Theyarelocatedbeneath
theseatassembly(Figure48).
Horn30A
Mainpower15A
Headlights10A
USBpowerpoint/options
10A
Fuel10A
Optionalliftkit—open
15A
g277716
Figure48
1.Fuseblock
42