Toro Workman GTX - Burnishing the Brakes; Reading the Manual and Viewing the Setup Material

2
CheckingtheFluidLevels
andTirePressure
NoPartsRequired
Procedure
1.Checktheengine-oillevelbeforeandafter
yourststarttheengine;refertoCheckingthe
Engine-OilLevel(page40).
2.Checkthebrake-uidlevelbeforeyourststart
theengine;refertoCheckingtheBrake-Fluid
Level(page54).
3.Checkthetransaxle-uidlevelbeforeyou
rststarttheengine;refertoCheckingthe
Transaxle-FluidLevel(page51).
4.Checktheairpressureinthetires;referto
CheckingtheTirePressure(page17).
3
BurnishingtheBrakes
NoPartsRequired
Procedure
Toensureoptimumperformanceofthebrakesystem,
burnish(break-in)thebrakesbeforeuse.
1.Bringthemachineuptofullspeed,applythe
brakestorapidlystopthemachinewithout
lockingupthetires.
2.Repeatthisprocedure10times,waiting1minute
betweenstops,toavoidoverheatingthebrakes.
Important:Thisprocedureismosteffective
ifthemachineisloadedwith227kg(500lb).
4
ReadingtheManualand
ViewingtheSetupMaterial
Partsneededforthisprocedure:
1
Operator'sManual
1Engineowner'smanual
1Registrationcard
1PredeliveryInspectionForm
1
CerticateofQuality
2Key
Procedure
•ReadtheOperator'sManualandtheengine
owner'smanual.
•Fillouttheregistrationcard.
•CompletethePredeliveryInspectionForm.
•ReviewtheCerticateofQuality.
11