Toro Workman GTX - Adjusting the High;Low Idle

6.Installthesparkplugintothecylinderhead,and
torquetheplugto27N∙m(20ft-lb).
7.Installthespark-plugwire.
8.Repeatsteps1through7fortheotherspark
plug.
AdjustingtheHigh/LowIdle
1.Liftthecargobedandsecureitwiththeproprod.
2.Atthethrottlecablehousing,loosentheforward
jamnutandtightentherearjamnuttoincrease
thelowidle(Figure44).
g229954
Figure44
1.Throttlecablehousing3.Throttlelever
2.Jamnuts
3.T estthehighidlewithatachometer:
A.EnsurethattheshiftleverisintheNEUTRAL
position.
B.Starttheengine.
C.Fullypresstheacceleratorpedaland
measuretheenginespeedwitha
tachometer;theenginespeedshouldbe
between3,650to3,750rpm.Ifitisnot,shut
offtheengineandadjustthecablejamnuts.
Important:Donotlowerthehighidle.
Testwithatachometertoensurethatthe
highidleisbetween3,650to3,750rpm.
4.Lowerandsecurethecargobed.
42