Workman HD Series Page 6 -- 53 Drive Train
36.Apply multi--purpose grease to O--ring and insert O--
ring into groove of transaxle case. Install cover and se-
cure with nut (item 2) with lockwasher and five (5) cap
screws (item 1). Torque fasteners from 11 to 13 ft--lb (15
to 17 N--m).
NOTE: If equipped with optional PTO, install PTO as-
sembly after the transaxle has been installed in vehicle.
Plug transaxle opening to prevent debris entry into
transaxle.
37.Install bell housing and secure with nine (9) flange
head screws ( item 2). Torque screws from 18.5to22ft--
lb (24.5 to 29.5 N--m).
38.Install extension spring (item 1).
1
2
3
Figure 112
1
2
Figure 113
Drive Train
To Next Page
Loading...
