Toro Z580-D Z Master - Changing the Engine Oil Filter

Figure46
1.Engineoil2.Funnelandhose
Important:Addtheoilveryslowlyanddonot
blocktheopeningofthellerhole(Figure47).
Ifyouaddoiltoofastorblockthehole,theoil
couldbackupandfoultheairintakes,causing
enginedamage.
Figure47
1.Notetheclearanceleftinthelleropening.
5.Replacethedipstickandinstallthefrontengine
panel.
6.Starttheengineandrunitatidlefor5minutes.
7.Shutofftheengine.
8.Wait3minutesandchecktheoillevel.
9.Addoil,ifrequired,tobringtheleveltotheupper
holeonthedipstick.
10.Replacethedipstickand,llercap,andthefront
enginepanel.
11.Checkforleaks.
Important:Donotoverllthecrankcasewith
oilbecausethismaycauseenginedamage.
ChangingtheEngineOilFilter
ServiceInterval:Aftertherst50hours
Every200hours
1.Draintheoilfromtheengine;refertoChangingthe
EngineOil.
Placeadrippanbeneaththeoildriptraytoreceive
oilfromtheoillterandoilpassagesintheengine.
2.Turntheltercounterclockwisetoremoveit
(
Figure48andFigure49).
Note:Disposeoftheoillterproperly.Recyclein
accordancewithlocalcodes.
3.Beforeinstallingthelter,lightlyoilthegasketon
thelterwithfresh,cleanoil.Screwthelteronby
handuntilthegasketcontactstheoillteradapter.
Tighten1/2to3/4turnmore.
4.Addoil;refertoAddingEngineOil.
Figure48
1.Oillter2.Rightsideofmachine
38