Torrey PC Series - How to Load a Memory; How to Turn on the Backlight; Power off Timer Function; Use of the Battery

12
HOW TO LOAD A MEMORY:
1) Press the key and then the memory address (00-99) you wish to load or just press any of the direct access keys
, ..., .
Example:
If you wish to save $26.60 in the memory address 6, follow these steps:
1) Type .
2) Press .
3) Type or just press the direct access key .
With this sequence the price is saved in the memory address 06. If you wish to load the memory of this example just type
or just , and in the "PRICE" indicator will be displayed the price stored in memory, in this case will be
$26.60.
To change the price stored in a memory just type the new price and store it in the memory address you want to change
following the procedure described above. These keys are very useful to avoid type the same price constantly. To use these
memories we suggest to have at hand the product list that are saved in each memory address.
To delete all the memories that are stored, turn the scale on and during the countdown type and all the
memories will be deleted to zero.
HOW TO TURN ON THE BACKLIGHT
This scale model has a backlight that helps you to see better the display information. It can be turned on in two ways:
1) Automatically: when an AC adaptor is connected to the scale.
2) Manually: It can be performed by pressing the key.
And can be turned off in two ways:
1) Automatically: when the scale is powered only by battery and the battery is low the backlight is turned off.
2) Manually: It can be performed by pressing the key.
Note: Using the backlight and only powering the scale with the battery, the charge of the battery will last less hours
POWER OFF TIMER FUNCTION
This function is permanently enabled when the scale is on, and only when you do not have the AC/DC power supply
connected to the scale. When the scale is not use for a period of time greater then 15 minutes, it will automaticaly turn off
and therefore all the information of the transaction you were doing will be lost. To turn on the scale again, just press the
key, and repeat your customers operations. The power off timer function permits you to save electricity and avoids
constant battery recharges.