EasyManua.ls Logo

Toshiba 40VL20 Series - Page 17

Toshiba 40VL20 Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Using the TVs features
Dot by Dot
“Dot by Dot” is a non-scaling display. Depending on
the input signal format, the picture is displayed with
side panels and/or bars at the top and bottom (e.g.
VGA input source).
Notes:
Using the special functions to change the size of
the displayed image (e.g. changing the height/
width ratio) for the purpose of public display or
commercial gain may infringe on copyright laws.
If the aspect ratio of the selected format is di erent
from the one of the TV transmission or video
programme, it can cause a di erence in vision.
Change to the correct aspect ratio picture size.
When using the PC connected via HDMI or RGB/
PC terminal, the moving image quality may be
deteriorated.
Using the picture still
Press to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press
again.
(Moving) (Still)
Note:
If you use this function except for the purpose of your
private viewing and listening, it may infringe the
copyright protected by the copyright laws.
Adjusting the Picture Position
Adjustment to the position of the picture may be
made to suit your viewing preferences.
1 From the Display Settings in the
PREFERENCES menu, press V or U to select
Picture Position.
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
Display Settings
2 Press Q, then press V or U to select the item
you want to adjust.
0
0
Picture Position
Horizontal Position
Reset
Vertical Position
3 Press Y or Z to adjust the settings as desired.
Horizontal Position
0
Notes:
When the picture size is in Wide or 4:3 mode, only
the Horizontal position can be adjusted.
When the picture size is in Native, PC Wide, PC
Normal and Dot by Dot mode, none of this
function will be available.
Resetting the Picture Position
This function resets your picture position settings to
the factory settings.
1 From the Picture Position menu, press V or U
to select Reset.
2 Press Q.
Activating the Picture Mode
This TV o ers the choice of the personalized picture
style. Press
to view the di erent modes
available.
AutoView, Dynamic, Standard, Movie 1, Movie 2,
Store, Game and PC are preset options and a ect
many features/settings within the TV.
Notes:
Store mode is only available when Location is set to
Store.
Game mode is available in external input mode
(other than aerial input). When you select Game
mode, suitable widescreen formats will be selected.
PC mode is available in RGB/PC input mode or HDMI
input mode.
The Picture Mode you select a ects the current
input only. You can select a di erent Picture Mode
for each input.
Resetting the Picture Mode
This feature resets all picture settings to the factory
settings.
Note:
If no picture settings have been changed, Reset is not
available.
1 From the PICTURE menu, press V or U to
select Reset, and then press Q.
2 A con rmation message will appear. Press Y or
Z to select Ye s , and then press Q.
4046VL20Series1En.indd17 2012/02/2814:44:57

Related product manuals