18
Using the TV’s features
Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting "Dynamic", if
you change the following items, such as Backlight,
Contrast, Brightness, Colour, Tint, Sharpness, and
the Advanced Picture Settings items, your new
setting are saved for "Dynamic" Picture Mode.
1 From the PICTURE menu, press V or U to
select either Backlight, Contrast, Brightness,
Colour, Tint or Sharpness.
2 Press Y or Z to adjust the settings as desired.
Setting the Black/White Level
Black/White Level improves the de nition of dark
areas of the picture.
1 From the PICTURE menu, press V or U to
select Advanced Picture Settings.
2 Press V or U to select Black/White Level.
PICTURE
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor
Active Backlight Control
Noise Reduction
ClearScan 100 Pro
3D Colour Management
Advanced Picture Settings
Off
Off
On
High
Black/White Level
Middle
3 Press Y or Z to select Middle, High, O or
Low.
Using the ClearScan 100 Pro
This feature will reduce picture blur without
decreasing image brightness or adding icker.
1 From the Advanced Picture Settings menu,
press V or U to select ClearScan 100 Pro.
2 Press Y or Z to select High, Middle, Standard
or O .
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1 From the Advanced Picture Settings menu,
press V or U to select Colour Temperature,
then press Q.
2 Press Y or Z to select Cool, Natural, or Warm
to suit your preference.
Colour Temperature
Colour Temperature Cool
Red Level
Green Level
Blue Level
Reset
0
0
0
3 Press V or U to select Red Level, Green Level
or Blue Level, then press Y or Z to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temparature
settings to the factory settings.
1 From the Colour Temperature menu, press V
or U to select Reset, then press Q.
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1 From the Advanced Picture Settings menu,
press V or U to select Noise Reduction, and
then press Q.
Noise Reduction
Auto NR On
MPEG NR Auto
DNR Auto
2 Press V or U to select Auto NR, and then press
Y or Z to select On or O .
O mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or O
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or O
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1 From the Advanced Picture Settings
menu, press V or U to select 3D Colour
Management.
2 Press Y or Z to select On.
3D Colour Management On
3 Press V or U to select Base Colour
Adjustment.
To Next Page
Loading...
