Toshiba 40VL20 Series - Page 40

40
6 Input the Security Key by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
Notes:
• The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
• There is only one key ID to set for WEP
encryption.
7 Highlight Done and press Q.
Note:
If Network Name is not displayed, see step 4 and
5 in Manual Setup below to set Network Name
before pressing Done.
Note:
Settings are not saved if BACK is pressed before Done
is selected.
Manual Setup
1 From the PREFERENCES menu, press V or U to
select Network Setup and press Q.
2 Press V or U to select Wireless Setup and
press Q.
3 Press V or U to select Manual Setup and press
Q.
4 Press V or U to select Network Name and
press Q.
The Software Keyboard window will appear.
5 Input the Network Name by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
6 Press V or U to select Authentication and
press Y or Z to select Open System, Shared
Key, WPA-PSK or WPA2-PSK.
7 Press V or U to select Encryption and press Y
or Z to select None, WEP, TKIP or AES.
Notes:
• Certain encryption types are only compatible
with speci c authentication types.
- When Authentication is Open System, only
WEP or None is compatible.
- When Authentication is Shared Key, only WEP
is compatible.
- When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES is compatible.
• When incompatible Authentication/Encryption
pairings are detected, a warning message will
be displayed, and no connection attempt will be
made until the incompatibility is resolved.
• There is only one key ID to set for WEP
encryption.
8 Press V or U to select Security Key and press
Q.
9 Input the Security Key by using the Software
Keyboard (- page 43).
To save your setting, press the BLUE button.
Note:
This item is greyed out when Encryption is None.
10 Highlight Done and press Q.
Note:
When Encryption is None, a message will
appear. Press Y or Z to select Ye s and press Q.
Note:
Settings are not saved if BACK is pressed before Done
is selected.
Wireless Information
The settings con gured in Wireless Setup can be
con rmed.
1 Press QUICK to open the Quick Menu.
2 Press V or U to select Wireless Information
and press Q.
Quick Menu
Picture Size
3D Settings
Toshiba Places
Super live
00:00
Off
USB Media Player
Sleep Timer
Network Media Player
Standard
Picture Mode
Signal Booster
Wireless Information
3 When the Network Type is Wireless, a Wireless
Information window will appear.
Note:
Press the RED button to scan for all APs.
Connecting your TV
4046VL20Series1En.indd40 2012/02/2814:44:59