430 Series
NOTE: In boot mode, the System Auto Off message does not appear.
User Setting This option allows you to set the battery save param-
eters on the sub-window, BATTERY SAVE OP-
TIONS. When you select this option, the automatic
setting feature (Full Power or Low Power) is disabled
and the user-preferred parameters become effective.
The default setting in the sub-windows depends on the
Battery Save Mode: Low Power (Long Life) or Full
Power (Normal Life). For details, see Battery Save
Options below.
(1) Battery Save Options
The following set of options can be selected in the sub-menu of User
Setting, which is one of the Battery Save Mode options.
Processing Speed
This feature changes the CPU processing speed.
High CPU operates at 120 MHz. (Default)
Low CPU operates at half speed.
CPU Sleep Mode
Use this option to enable or disable the CPU sleep function.
Enabled Enables sleep mode.
Disabled Disables sleep mode.
Display Auto Off
Use this option to disable or set the duration of the display automatic
power off function. This function causes the computer to turn the
LCD panel illumination off if you make no entry for the set period of
time.
Disabled Disables display automatic power off.
xx Min. Automatically turns off power to the LCD panel
illumination if the panel is not used for the duration
set. The duration xx can be set to 1, 3, 5, 10, 15, 20,
or 30 minutes.
To Next Page
Loading...
