430 Series
4.2 Battery Pack
Removing the Battery Pack
To remove the battery pack, follow the steps below and refer to Figures 4-1 and 4-2.
1. Turn off the power to the computer. Disconnect the AC power cord and all
external cables connected to the computer.
2. Turn the computer over.
3. Push the battery cover lock to release the battery cover.
4. Push the cover forward until it stops (about one centimeter or half an inch).
Figure 4-1 Removing the battery pack cover
5. Lift off the cover.
6. Pull back the battery latch and lift out the battery pack.
Figure 4-2 Removing the battery pack
NOTE: For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your Toshiba dealer.
To Next Page
Loading...
