430 Series
3.25.2 Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the following:
↑ ↓ → ←↑ ↓ → ← : Select items, Space, BkSp : Change values
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTES:
1. The Panel Power On/Off item appears only when the computer is in Resume mode.
2. The 430CDS "LCD Display Colors" options are 222k and 4096 colors.
3.25.3 Moving Within the SETUP Menu and Changing Values
1. Press →→ and ←← to move between the two columns. Press ↑↑ and ↓↓ to move be-
tween items in a column.
2. Press either the space bar or BkSp to change the value.
3.25.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message
is displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
MEMORY
BIOS version = x.xx
SYSTEM SETUP
DISPLAY
Display Adapter = VGA compatible
LCD Display Mode = Color
VGA Segment Address= E400H
LCD Display Colors = 16M Colors
Power On Display = Internal/External
Text Mode Stretch = Enabled
Total = 16384 KB
Base = 640 KB
Extended = 15552 KB
Shadow BIOS ROM = 192 KB
Serial Port = COM1(3F8H/IRQ4)
Infrared Port = Not Used
Parallel Port = LPT1(378H/IRQ7/CH3)
Sound System = Address/IRQ/DMA
OTHERS
HARD DISK
HDD Mode = Enhanced IDE (Normal)
HARD DISK
POWER ON PASSWORD
Not Registered
I/O PORTS
Power-up Mode = Resume
CPU Cache = Enabled
Battery Save Mode = Full Power
Alarm Volume = High
System Beep = Enabled
Panel Power On/Off = Disabled
Alarm Power On = Disabled
Keyboard = Layout/Fn
Pointing Devices = Auto-selected
Boot Priority = FDD
→HDD
To Next Page
Loading...
