430 Series
2.1 Troubleshooting
Chapter 2 describes how to determine if a Field Replaceable Unit (FRU) in the 430 series is
causing the computer to malfunction. The FRUs covered are:
1. Power Supply (Battery Pack, AC PS Unit)
2. System Board
3. Sound Board
4. VGA Board
5. Floppy Disk Drive
6. Hard Disk Drive
7. CD-ROM Drive
8. Keyboard
9. Display
The Diagnostics Disk operations are described in Chapter 3 and detailed replacement proce-
dures are given in Chapter 4.
The following tools are necessary for implementing the troubleshooting procedures:
1. Diagnostics Disk
2. Phillips screwdriver (2 mm)
3. Toshiba MS-DOS system disk(s)
(You must install the following onto the disk: SYS.COM, FORMAT.COM,
FDISK.COM and FDISK.EXE)
4. 2DD or 2HD formatted work disk for floppy disk drive testing
5. Cleaning kit for floppy disk drive troubleshooting
6. RS-232-C wraparound connector
7. Printer wraparound connector
8. Multimeter
9. External CRT
10. PS/2 or compatible keyboard
11. PS/2 or compatible mouse
12. PC card wraparound card
13. Multimedia sound system with line-in and line-out ports
14. Headphone
15. Toshiba EMI test disk TDY-03
16. Music CD
17. Serial Port Wraparound Connector
18. CD-ROM Drive
19. Lens cleaner for CD-ROM laser pickup lens
To Next Page
Loading...
