430 Series
(i) Pointing Devices
Enables or disables the AccuPoint.
Auto selected The AccuPoint is disabled when a PS/2 mouse is
connected, otherwise the AccuPoint is enabled.
(Default)
Simultaneous If a PS/2 mouse is connected, both the AccuPoint
and the external mouse are enabled.
(j) Boot Priority
Use this option to select the disk drive priority for boot up.
FDD HDD The computer looks for bootable files first on the
FDD and next on the HDD. (Default)
HDD FDD The computer looks for bootable files first on the
HDD and next on the FDD.
You can reverse the order by holding down the F10 key while the computer
is booting. This procedure alternates the setup setting.
To Next Page
Loading...
