430 Series
3.16 CD-ROM Test
To execute the CD-ROM test, select 13 from the DIAGNOSTICS TEST MENU, press Enter
and follow the directions on the screen. The CD-ROM test contains four subtests that test the
computer’s CD-ROM functions.
NOTE: First make sure the CD-ROM driver (CDROMDRV.COM) is installed and
insert the test media CD (Toshiba-EMI Test Disk TDY-03).
Subtest 01 Sequential Read
This subtest is a sequential reading of one block unit (2K bytes) of all the
logical addresses.
Subtest 02 Read Specified Address
This subtest reads one-block data from a specified address.
Subtest 03 Random Address/Data
This subtest reads one-block data and multi-block data from random addresses
200 times.
Subtest 04 Playback Music
NOTE: The Toshiba-EMI Test Disk TDY-03 cannot be used for Subtest 04.
For this test, use an ordinary music CD.
This subtest reads track data from a specified track and plays the sound.
To Next Page
Loading...
