Toshiba B-EP2DL-GH40-QM-R - Page 54

- 52 -
 Property setting menus in the “Properties”
Right-click the printer icon, and select
the “Properties”.
3.5 Font
3.6 Tools
3.7 Printer font
: Fully supported. X: Use the default.
Function
Description
Support
Font tab
[Font] button
Allows adding, modifying and deleting the currently
defined bar code fonts.
RFID fonts are not supported.

[View] button
Allows limiting the view of bar code fonts to only
those of specified type.

[Tool] button
Font settings
[Resident Fonts]
<List Scalable Fonts>
When selected, the scalable fonts are usable.

<List Condensed and Expanded Widths>
When selected, the fonts of which character width
is condensed or expanded are usable.

<List Specified Scale Factors>
When selected, the fonts of which character width
is scalable at any scale ratio are usable.
X
<Percentages>
Allows specifying the scale ratio.
X
<List Bitmap Fonts>
When selected, the bitmap fonts are usable.

<Simulate Scalable Fonts>
When selected, the bitmap fonts of same size with
the outline fonts are specified.
X
<List Magnifications>
When selected, the magnified fonts are usable.

<List Condensed and Expanded Widths>
When selected, the fonts of which character width
is condensed or expanded are usable.
