Toshiba B-EP2DL-GH40-QM-R - Tools Tab Functionality

- 53 -
Function
Description
Support
<List Multiple Character Set Fonts Separately>
When selected, print fonts are printed with different
code page.
X
[Utility Fonts]
<List Utility Fonts>
When selected, the utility fonts are usable.

<List Bar Code and RFID Fonts>
When selected, bar code fonts and RFID fonts are
usable. At present, RFID fonts are not supported.

<List Printer Command Font>
When selected, specified data are sent to the
printer as they are.

<List Driver Command Font>
When selected, the font which converts the data in
the specified format into a command is usable.
X
<Combine Adjacent Bar Code & RFID Fields>
When selected, the characters are combined if the
same bar code font is specified for them.

[Encoding]
Allows specifying the method of encoding the data
into bar codes.
X
Bitmap Font Settings
Refer to the Driver Option of the [Tool] tab.
---
Tool tab
[Print]
Allows performing print tests.

[Action]
<Form Feed>
The printer feeds one label.

<Cut>
The printer cuts the label immediately.

<Read Printer Information>
Shows the printer version and option information
obtained from the printer.
X
<Manage XML Print Files>
Allows managing the files of label formats,
graphics, and fonts stored in the printer.
X
<Reset Printer>
Resets the printer.

<Test Print Head>
Allows execution of the printer’s broken element
test.

<Send Printer Command>
Sends the generated printer commands to the
printer. When the bi-directional communication is
enabled, the printer status is obtained and shown
after sending the commands.

<Send File To Printer>
Sends the command file to the printer.

[Configure]
Printer Options
<Automatic Status Response>
When selected, the printer status is automatically
sent at the end of a job or the occurrence of an
error.

<Include Job Information>
When selected, the job information obtained from
the printer via SNMP is included in the print job.
