Toshiba B-EX6T1 - Detection Area of the Transmissive Sensor

7. SUPPLY SPECIFICATIONS ENGLISH VERSION
7.1 Media
E7-3
7.1.2 Detection Area of the Transmissive Sensor
The Transmissive Sensor is movable from the centre to the left edge of media.
The Transmissive Sensor detects a gap between labels, as illustrated below.
NOTE:
Round holes are not acceptable.
Min 12 mm
＜Tags＞
＜Labels＞
Min. 2.0mm
(
Min. 6.0mm
when the cutter
is used)