Touch Screen Controller Owner's Manual
28
-EN
By using the energy report software, you can display the operation status and operation history of the air conditioners
aggregated by this Unit on a PC screen. You can also easily check and output reports (monthly report/daily report) for electric
power distribution with a PC. When using the energy report software, apply the following settings.
For details on how to use the Energy Report Software, refer to the Operating Instructions of the Energy Report Software.
1 Set the IP address of the Unit (P.75)
1 Install the Energy Report Software on the PC
2 Register the target system (this Unit) in the Energy Report Software
For details, refer to the Operating Instructions of the Energy Report Software.
Setting when Using Energy Report Software
Unit settings
PC settings