Toshiba BMS-CT1280TU - Change to energy saving temperature; Set the temperature change range

Touch Screen Controller Owner's Manual
51
-EN
Change to energy saving temperature
An energy saving function that changes (shifts) the set temperature according to the current operation mode as follows.
● NOTE
Depending on the connected model, it may not be displayed.
Set the temperature change range
You can set the set temperature range for each operation mode.
● NOTE
• Depending on the connected model, it may not be displayed.
• If the current set temperature of the air conditioner is outside of the set temperature range after the change, it will be
changed to the temperature within the range after the change.
1 Tap the upper/lower limit temperature you want to
change
● NOTE
Depending on the connected model, it may not be configurable.
2 Tap the number, enter the temperature, and tap [2-(1)]
Operation Mode Set Temperature Shift Width
Cool/Dry Current set temperature +2°C shift
Heat Current set temperature -2°C shift
Auto/Fan Remain at current set temperature
2
-(1)
2
-(1)