24 11. Maintenance
When closing the paper guide, be careful not to drop anything metal or any other foreign objects, such as a paper
clip, into the guide. This may cause the printer to malfunction.
11
Return the 2 levers to their original position.
12
Push the cutter harness [5] into the printer.
13
Attach the cutter unit [3] to the designated position.
Confirm that the two lower hooks [6] and the two upper hooks [7] of the cutter unit are inserted into the slits
indicated by the arrows.
[
4
]
[
5
]
[
3
]
[
7
]
[
7
]
[
6
]
To Next Page
Loading...
