e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 26
[E] Switching regulator unit (PS)
(1) Take off the left cover.
P.2-19 "[C] Left cover"
(2) Disconnect 15 connectors.
Note:
The number of connectors to be discon-
nected is 15 when the following options are
installed.
A: Paper Feed Controller (GH-1060)
B: Fax Kit (GD-1220/1221)
Note:
Connect the connectors to the correct faston
terminals on the switching regulator board.
Connector Harness
F. Red - Black-thick
E. Blue - White-thick
D. White - Black-thin
C. White - Red-thin
B. White - Red-thick
A. White - White-thick
Fig. 2-30
Fig. 2-31
(3) Remove 2 screws, slide the switching regula-
tor unit with the whole case slightly to the
front, and then lift it up to take it off.
Fig. 2-32
A
B
F
E
D
C
B
A
Switching regulator unit
08/06
To Next Page
Loading...
