Toshiba e-studio 207 - Page 10

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 2
* When the ADF and RADF are used, the copy speed of 16/20/23 sheets per minute is only available
under the following conditions:
• Original/Mode: Single side original/A4/LT size. APS/automatic density are not selected.
• Number of sheets: 16 or more. (e-STUDIO167)
20 or more. (e-STUDIO207)
23 or more. (e-STUDIO237)
• Reproduction ratio: 100%
Copy speed for thick paper (Copies/min.)
e-STUDIO167/207/237
Thick 1 (81 g/m
2
to 105 g/m
2
, 21.3 lb. Bond to 28 lb. Bond): Bypass feed on a sheet by sheet baisis
only
Thick 2 (106 g/m
2
to 163 g/m
2
, 28 lb. Bond to 90 lb. Index): Bypass feed on a sheet by sheet baisis only
 Copy paper
 First copy time ..................... Approx. 7.6 sec.
(A4, 100%, original placed manually, e-STUDIO167/207)
Approx. 7.5 sec.
(A4, 100%, original placed manually, e-STUDIO237)
Approx. 7.7 sec.
(LT, 100%, original placed manually, e-STUDIO167/207)
Approx. 7.5 sec. |
(LT, 100%, original placed manually, e-STUDIO237)
Approx. 7.7 sec.
(LT, 100%, original placed manually)
 Warming-up time.................. Approx. 25 sec. (temperature: 20°C)
 Multiple copying ................... Up to 999 copies; Key in set numbers
 Reproduction ratio ............... Actual ratio: 100±0.5%
Zooming: 25 to 200% in increments of 1%
 Resolution/Gradation ........... Scanning: 600 dpi x 600 dpi
Printing: Equivalent to 2400 dpi x 600 dpi
Gradation: 256 steps
 Eliminated portion ................ Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)
Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)
Drawer PFU PFP ADU Bypass copy Remarks
Size A3, A4, A4-R, B4, B5, B5-R,
A5-R(Only for PFP), LD, LG, LT, LT-R,
ST-R(Only for PFP), FOLIO, COMPUTER,
13"LG, 8K, 16K, 16K-R
A3 to A5-R, LD to ST-R,
FOLIO, COMPUTER, 13"LG,
8.5" x 8.5", 8K, 16K, 16K-R
(Non-standard or user-speci-
fied sizes can be set.)
Weight
64 to 80 g/m
2
, 17 lb. Bond to 21.3 lb. Bond 50 to 163 g/m
2
(Single paper feeding)
64 to 80 g/m
2
(Continuous feeding)
Special
paper
– Tracing paper, labels, OHP film
(thickness: 80 µm or thicker),
These special papers
recommended by
Tosh i ba Te c