Toshiba e-studio 207 - Page 210

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DEVELOPMENT SYSTEM
12 - 16
(7) Disconnect 2 connectors, remove 3 screws
and take off the bracket.
Fig. 12-19
(8) Remove 1 E-ring and take off the guide roller
on the front side.
Fig. 12-20
(9) Remove 1 screw and the gear.
Fig. 12-21
Connector
Bracket
Guide roller
E-ring
Gear