Toshiba e-studio 207 - Page 229

13
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
FUSER / EXIT UNIT
13 - 13
[C] Exit roller
(1) Take off the fuser roller unit.
 P.13-12 "[B] Pressure roller unit / Fuser
roller unit"
(2) Release the latch and take off the gear-A.
Fig. 13-9
(3) Take off the gear-B.
Fig. 13-10
(4) Remove the bracket.
Fig. 13-11
Gear-A
Gear-B
Bracket