14
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
14 - 13
[B] ADU driving PC board (ADU)
[C] ADU motor (M8)
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Disconnect 2 connectors, release the latch
and take off the ADU driving PC board.
Fig. 14-11
(1) Take off the ADU.
P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Disconnect 1 connector, remove 2 screws
and take off the ADU motor with the bracket.
Fig. 14-12
(3) Remove the gear.
(4) Remove 2 screws and take off the ADU
motor.
Fig. 14-13
Latch
ADU driving PC board
Connector
ADU motor Bracket
Gear
ADU motor
To Next Page
Loading...
