Toshiba e-studio 207 - Page 252

e-STUDIO167/207/237 © 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
14 - 14
[D] Upper transport roller
[E] Lower transport roller
(1) Take off the ADU.
 P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Take off the ADU motor.
 P.14-13 "[C] ADU motor (M8)"
(3) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
Fig. 14-14
(4) Remove 1 E-ring, 1 gear and 2 bushings,
and then take off the upper transport roller.
Fig. 14-15
(1) Take off the ADU.
 P.14-12 "[A] Automatic Duplexing Unit
(ADU)"
(2) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
Fig. 14-16
Pin Belt
Pulley
E-ringPulley
Bushing
Upper transport roller
Gear Bushing
E-ring
Pin Belt
Pulley
E-ringPulley