14
© 2007 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO167/207/237
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
14 - 15
[F] Paper guide
(3) Remove 1 clip and 2 bushings, and then take
off the lower transport roller.
Fig. 14-17
(1) Open the ADU cover.
(2) Release 1 latch and take off the guide on the
front side.
Fig. 14-18
(3) Release 1 latch and take off the paper guide
while sliding it toward the font.
Fig. 14-19
BushingLower transport roller
Bushing
Clip
Guide
Latch
Paper guide
To Next Page
Loading...
