100 Network Administrator’s Guide — Maintaining from TopAccess
3. Select the language of the software that you are going to
upload in the “Language” drop down box.
4. Select the software that you are going to upload in the
“Upload Files” drop down box.
Driver Files — Select this to upload the setup files for the Client1 CD-ROM and
Client2 CD-ROM.
Macintosh PPD Files — Select this to upload the self-extracting files that con-
tains the Macintosh PPD files for Mac OS 8.6/9.x and Mac OS X.
UNIX Filter — Select this to upload the tar files that contains filters for each UNIX
workstation.
Point And Print — Select this to upload the printer driver files for the Point and
Print installation.
5. Click [OK].
• The bottom section in the page will be changed for selected software.
6. In each field displayed, click [Browse] to locate the setup files
to be uploaded.
To Next Page
Loading...
