50 Network Administrator’s Guide — Setting up Device Settings
6) Network path or queue name
Enter the queue name for SMB printing. This queue name is used when users use the dis-
covery function of the installer to obtain the network queue during the installation. Gener-
ally use “print” for the Network path or queue name.
7) Location
Enter the name of the department or site. This is displayed in the Device tab page that
appears first when accessing the TopAccess web site for users.
8) Contact Information
Enter the name or title of the contact person for this equipment. This is displayed in the
Device tab page that appears first when accessing the TopAccess web site for users.
9) Service Phone Number
Enter the phone number for service on this equipment. This is displayed in the Device tab
page that appears first when accessing the TopAccess web site for users.
10) Administrative Message
Enter the message about this equipment for all users to read. This is displayed in the Device
tab page that appears first when accessing the TopAccess web site for users.
11) Administrator’s Password
If you want to change the administrator’s password used to log in functions from the Touch
Panel Display and TopAccess, enter the 6-digit password. You cannot leave this field blank.
Setting up the Energy Save
You can set the time to enter the Auto Clear, Auto Power Save and Auto Power Off mode.
1) Auto Clear
Select how long this equipment can remain inactive before the Touch Panel Display auto-
matically returns to the default display and settings.
2) Auto Power Save
Select how long this equipment can remain inactive before entering the power save mode.
3) Sleep/Auto Shut Off
Select how long this equipment can remain inactive before entering the sleep mode or auto
shut off mode.
Setting up the Time and Date
You can set the date, time, time zone, and date format. You can also enable the daylight mode.
1
2
3
1
2
3
4
To Next Page
Loading...
