Network Administrator’s Guide — Setting up NetWare Print Server 175
Before configuring the NetWare file server in NDPS mode, please confirm followings:
• For NetWare 5.x, the Support Pack 5 and Novell Gateway version 2.1.6 or later with
ndps3sp2c are installed.
• For NetWare 6.x, the Support Pack 2 and Novell Gateway version 3.00 or later with
ndps3sp2c are installed.
• Make sure you have a valid IP address for this equipment and for any computers that will
print to it.
• In e-STUDIO4511 Series, e-STUDIO450 Series, or e-STUDIO280 Series Setup, enable
TCP/IP and enter the IP address, Subnet mask, and Gateway address for this equipment.
Setting up the NDPS with NetWare Administrator
1. In NetWare Administrator, select the container object to cre-
ate the printer and click the [Object] menu and select [Cre-
ate].
• The New Object dialog box appears.
2. Select “NDPS Broker” and click [OK].
• The Create NDPS Broker Object dialog box appears.
SUPPLEMENT: • If the NetWare file server has been installed as supporting the NDPS service, the
NDPS Broker is created as default. In this case, you can use the default NDPS Bro-
ker.
3. Specify the “NDPS Broker Name” and “RMS Volume”
options, and click [Create].
• The NDPS Broker is created.
4. Click the [Object] menu and select [Create].
• The New Object dialog box appears.
5. Select “NDPS Manager” and click [OK].
• The Create NDPS Manager Object dialog box appears.
6. Specify the “NDPS Manager Name”, “Resident Server”, and
“Database Volume” option, and click [Create].
• The NDPS Manager is created.
7. Double-click the NDPS Broker object that you created.
• The NDPS Broker dialog box appears.
8. Click [Resource Management (RMS)].
9. Click [Add Resources...].
• The Manage Resources dialog box appears.
10. Select the applicable OS icon in the “Resource Types” list,
and click [Add...].
• The Add Resources dialog box appears.
To Next Page
Loading...
