4 SETTING ITEMS (ADMIN)
154 SETTING NETWORK FUNCTIONS
3
Press the [AUTO] button to automatically detect the appropriate
ethernet speed, or press other specific ethernet speed button.
y When you select a specific ethernet speed, you must select the same ethernet speed
as set in the connected network. If you do not know the ethernet speed that must be
used, select the [AUTO] button.
y If the network is not stable, power OFF the equipment then ON.
4
Press the [ENTER] button.
y Returns you to the NETWORK menu.
5
Continue to another network setting if required, then press the
[APPLY NOW] button.
y The "NETWORK INITIALIZING" message is displayed and this equipment starts ini-
tializing the network interface card to apply the changes.
To Next Page
Loading...
