3 SETTING ITEMS (USER)
86 SETTING COPY FUNCTIONS
SETTING COPY FUNCTIONS
You can change the initial setting (default setting) of copy job.
1
Press the [USER FUNCTIONS] button on the control panel to enter
the User Functions menu.
2
Press the [USER] button, and then press the [COPY] button on the
touch panel.
y The COPY screen is displayed.
3
Specify the following items as you require.
y In the “EXPOSURE FOR COLOR” and “EXPOSURE FOR BLACK” options, press the
desired mode button.
y In the “COLOR MODE” option, press the desired mode button. Only [BLACK] can be
selected when the No Limit Black function is enabled.
y In the “IMAGE DIRECTION” option, press the desired mode button. For more
descriptions for the IMAGE DIRECTION option, please refer to the Operator’s Man-
ual For Basic Function.
4
Press the [Next] button to display the next screen.
To Next Page
Loading...
