MANAGING DEPARMENT CODE 59
Registering a New Department Code
The function allows you to register new department code.
After registering the department code(s), you must enable the Department Code function.
P.55 “Enabling Department Code”
1
In the DEPT. MANAGEMENT menu, press the [DEPARTMENT REG-
ISTRATION] button.
y The DEPARTMENT CODE screen is displayed.
For the procedure to display the screen above, see "Logging On As Administrator".
P. 53
2
Press the undefined department code and press the [CHANGE] but-
ton.
y The input screen is displayed.
If the touch panel does not display an undefined department code, press the [Next] but-
ton to display the next screen.
To Next Page
Loading...
