4 SETTING ITEMS (ADMIN)
156 SETTING NETWORK FUNCTIONS
3
Press the [OTHER] button.
y The OTHER screen is displayed.
4
Press the [ENABLE] button to enable the LDAP network service, or
[DISABLE] button to disable it.
y Optionally you can enter the SNMP read community name for the SNMP access by
pressing the [SNMP READ COMMUNITY] button.
When you press this button, the input screen is displayed. Enter the value using the
keyboard and digital keys, and press the [ENTER] button to set the entry.
y If you specify a community name other than “public” for the Read Community, the
applications that use MIB (TopAccessDocMon, TWAIN driver, File Downloader, and
Address Book Viewer) will be unavailable. The SNMP communication of the printer
driver also will be unavailable, so that the obtaining the configurations, confirming the
department code, and obtaining the available boxes in e-Filing will be disabled.
y When you set the “Read Community” option blank, the SNMP communication
between the SNMP Browser of Client PC and this equipment will be disabled.
5
Press the [ENTER] button.
y Returns you to the NETWORK menu.
To Next Page
Loading...
