SETTING FAX FUNCTIONS 167
3
Specify following items as required.
y RX MODE — Press the [AUTO] button to receive faxes automatically, or [MANUAL]
button to receive faxes manually. When you select the manual mode, you can
receive the faxes by pressing the [START] button when it rings.
y MONITOR VOLUME — Press the arrow buttons to change the monitor volume.
y COMPLETION TONE VOLUME — Press the arrow buttons to change the complete
volume.
When the User Management Setting is enabled, only the [AUTO] button can be selected
for the RX MODE option.
4
Press the [Next] button to display the next screen.
5
Specify following items as required.
y DIAL TYPE — Press the [MF] button to select the Multi-frequency mode, or [DP] but-
ton to select the Dial Pulse mode for the line 1.
y DIAL TYPE (LINE2) — Press the [MF] button to select the Multi-frequency mode, or
[DP] button to select the Dial Pulse mode for the line 2. This is available only when
the optional 2nd line board is installed.
The “DIAL TYPE” and “DIAL TYPE (LINE2)” is not available for the European version.
6
Press the [ENTER] button.
y Returns you to the FAX menu.
To Next Page
Loading...
