MANAGING DEPARMENT CODE 61
5
Enter the 5-digit code again in the “Retype New Code” field using
the digital keys, and then press the [SET] button to set the entry.
y If you enter the code, asterisks (*) appear in the “Retype New Code” field.
y If you want to clear the code to retype it, press the [CLEAR] button on the Control
Panel.
If you want to return to the “New Code” field to retype it, press the [RESET] button.
6
Press the [ENTER] button at the bottom of the touch panel.
y The LIMITATION screen is displayed.
To Next Page
Loading...
