Toshiba E-STUDIO 3510C - Page 26

1 Setting up Network Server
24 Setting up NetWare Print Server
— Setting up the equipment as an NDPS Object
Considerations and Limitations
This equipment should be automatically discovered by the TOSHIBA NDPS Gateway. If not,
manually create a new NDPS Printer Agent. ( P.24 “Create a Printer Agent”)
Prerequisites
1
Load “NWADMN32.EXE” on the administrator workstation to
launch the NetWare administration program.
2
Determine the Tree or Context under which to install the NDPS
printer agent.
3
Verify that both a NDPS Manager and Broker object exist at this
level. If not, create them.
4
Add drivers to the NDPS Broker. They can then be selected from
the drivers list and associated with the Printer Agent.
Add Drivers to the NDPS Broker
1
Launch NWAdmin.
2
Double-click the Broker icon.
3
Click [Resource Management (RMS)].
4
Click [Add Resources].
5
Select the applicable system: the Windows 98/Me/2000, Windows
NT or Windows XP operating system. Click [Add].
6
Click [Browse] to locate the driver's .inf file on either the distribu-
tion CD-ROM or a shared network location.
7
Click [OK].
Now, when you create a Printer Agent, you can associate the drivers by selecting them
from the list of drivers managed by the broker.
Create a Printer Agent
1
Right-click anywhere within the Parent Level (Tree or Context under
which the NDPS Printer Agent is to be installed) and then choose
[Create].
y The New Object dialog box appears.
2
From the “Class of New Object” list box, select “NDPS Printer” and
click [OK].
y The Create NDPS Printer dialog box appears.
3
Enter the NDPS Printer Name, then click [Create].
y The Create Printer Agent dialog box appears.